The coat hanger trick - SpotOn – "Gas-Assisted Injection Molding (GAIM)"
01. Jun 2021

The coat hanger trick - SpotOn – "Gas-Assisted Injection Molding (GAIM)"

You don't necessarily need to know the "coat hanger trick" for our next SpotOn 😉 ...but nevertheless it will be very informative, because this time the focus will be set on current development trends and innovative approaches to solutions for the gas injection molding process. We are particularly pleased to have Wittmann Battenfeld, the world's leading manufacturer of injection molding machines, robots and peripheral equipment for processing a wide variety of plasticizable materials, as a highly competent event partner at our side ...

Drop in  and register now for the free SpotOn "Gas-Assisted Injection Molding (GAIM)", Thursday, 17.06.2021, 4.00 p.m. ... Oops, sorry, you already have something planned?!!! Then take your chance next Thursday, 10.06.2021, from 11.00 a.m. with the SpotOn "Gasinnendruck (GID)" in German ... 😉.

In this SpotOn you will learn more about the latest developments and technical possibilities of GAIM methods, as well as how the dynamics of fluid injection technology can be optimized using simulation technology. The scope of apllication is extremely versatile and the process does not only extend to conventional thermoplastic materials, but is used for almost all molding compounds with swelling flow behavior, including a large number of thermosets and elastomers, too. The targeted formation of cavities and the packing pressure acting from within - with virtually no pressure loss - enable considerable material savings with increased component quality whilst maintaining a similar stiffness of the molded parts. In addition to material savings and weight reduction, shorter cycle times have an additional economic effect.

The event will be moderated by Florian Aichberger, Sales Engineer, SimpaTec Austria. You are invited to ask questions via chat during the entire event. We are happy to answer the most important chat questions in the discussion at the end of the SpotOn session.

This is of interest to you? Then register here immediately ...

Are you interested in technical innovations evolving around innovative injection molding manufacturing processes, but GAIM is not in the centre of your focus?
Our SpotOn's take place monthly, alternating - every Thursday, 11.00 a.m. in German and the following week on Thursdays, 4.00 p.m. in English on topics regarding current developments, methods or technical innovations dealing with injection molding.

Take a look and
Stay up-to-date with us. We look forward to seeing you.

Back to overview