28 Jan 2021 16:00 - 17:30

SpotOn – “Weld lines“


You are welcome to take a look at our free SPOT ON event series. Today's focus is set on "Weld lines".

A fast and reliable identification of weak points in the component enables the designer to initiate suitable countermeasures in an early development phase of the component or the tool layout. Two common cosmetic surface defects that often occur are weld line and air traps. The elimination of resulting component defects often causes a large part of the additional costs due to iterations in product, tool and process optimization.

In this Spot On you will learn how to optimize the filling process, the venting and the process conditions so that weld lines will not appear in the first place.

We are very much looking forward to our guest speakers >> Mr. Andreas Filler, HotSet GmbH, who will give us a practical insight into the current state of technical methods and procedures to avoid possible causes for component defects and Dr. Vito Leo, BIMS seminars srl, who has more than 30 years’ experience in the plastics industry and who will hold his presentation titled Visco-elasticity and its role in weld-line strength".

Additionally, our Mr. Marc Kurz, Managing Director of SimpaTec, will demonstrate the simulation based analysis and optimization approach to avoid component defects. The event will be moderated by him, too. You are welcome to ask questions during the entire session via using the chat function. We will be happy to answer the most important chat questions in the discussion round at the end of the Spot On.

Broaden your horizon and find out about the latest developments regarding weld lines.

4:00 pm "Welcome to our Spot On's"
                  Marc Kurz, SimpaTec
4:05 pm  "Partial dynamic temperature control - High dynamic process with minimum energy
                  consumption (60K/s - 100W)"
                  Andreas Filler, HotSet GmbH
4:30 pm  "Visco-elasticity and its role in weld-line strength"
                  Dr. Vito Leo, BIMS seminars srl
4:55 pm  "Optimization of weld lines using simulation"
                  Marc Kurz, SimpaTec
5:20 pm   Discussion of the chat questions

Register now for our - Spot On "Weld lines"

By the way - also for German speaking interested people there is the possibility to inform about current trends for weld lines, register now for
>>> the free Spot On "Bindenaht" on Thursday, January 21, 2021, 11.00 a.m. in German!

Participation fee
free of charge



Bevorzugen Sie den direkten Kontakt? Gern stehen wir Ihnen auch telefonisch zur Verfügung.

+49 241 56 52 76-0

Bei Rückfragen zu Ihrer Anmeldung wenden Sie sich bitte an unsere Veranstaltungsabteilung.