19 Nov 2020 16:00 - 17:00
Verfügbarkeit
logo-item

Spot On – “Conformal Cooling“

Spot Ons

SPOT ON!!! & ACTION!
Our free SPOT ON event series continues and you are cordially invited to take a closer look. Today’s focus is set on "Conformal cooling".

You can look forward to >>> Mr. Reiner Westhoff, Managing Director of Contura MTC GmbH, and his presentation titled "Conformal Cooling - The key to significant piece cost reduction on injection molded products". He will inform you in detail and thoroughly about updates, optimizations and further technical developments for conformal cooling. A heartily thank you to him.

>>> Cristoph Hinse, Managing Director SimpaTec GmbH, will be holding his contribution "Temperature control - why and how? Simulation answers!" and will provide insights into the possibilities of simulation technology. The event will be moderated by Steffen Paul, Managing Director of SimpaTec. You are welcome to ask questions during the entire session via using the chat function. We will be happy to answer the most important chat questions in the discussion round at the end of the Spot On.

Spot On "Conformal Cooling":
Are you looking for THE solution to produce a plastic component which is not only stable but also has an optimal surface finish and is free from stresses?
Correct mold temperature control for mold inserts allow you to validate conformal cooling well in advance and thus giving you information about the temperature distributions, etc., which allow you to assess the optimal cooling method which makes the technology more than worthwhile - even for highly complex component. Slow assembly costs, better part quality and shorter cycle times are guaranteed.

Expand your horizon and find out about the latest developments in the field of conformal cooling.

Agenda:
4:00 p.m.  "Welcome to our Spot On"
                   Steffen Paul, SimpaTec
4:05 p.m.  "Temperature control - why and how? Simulation answers!"
                   Cristoph Hinse, SimpaTec GmbH
4:30 p.m.  "Conformal Cooling - The key to significant piece cost reduction
                   on injection molded products"
                   Reiner Westhoff, Contura MTC GmbH
4:50 p.m.  Discussion of the chat questions

Register now for our - Spot On "Conformal Cooling"

By the way - also for German speaking interested people there is the possibility to inform about current trends for conformal cooling, register now for
>>> the free Spot On "Konturnahe Kühlung" on Thursday, November 12, 2020, 11.00 a.m. in German!

Participation fee
free of charge

Teilnahmegebühr
free of charge
image-item
Diese Veranstaltung ist ausgebucht

Anmeldung

  • In der Teilnahmegebühr sind die Teilnahme einer Person, die Tagungsunterlagen sowie die Verköstigung während der gesamten Veranstaltungsdauer enthalten. Die Rechnungslegung erfolgt direkt nach der Anmeldung. Die Entrichtung der Teilnahmegebühr berechtigt zur Teilnahme an der jeweiligen Veranstaltung.Stornierungen bis 30 Tage vor Veranstaltungsbeginn erfolgen kostenfrei. Bei einer Stornierung bis 14 Tage vorher werden 70%, nach diesem Zeitpunkt 100% der Teilnahmegebühr berechnet.

Kontakt

Bevorzugen Sie den direkten Kontakt? Gern stehen wir Ihnen auch telefonisch zur Verfügung.

+49 241 56 52 76-0

Bei Rückfragen zu Ihrer Anmeldung wenden Sie sich bitte an unsere Veranstaltungsabteilung.

events@simpatec.com