SpotOn – “Water Injection Molding“SpotOn's
SPOT ON!!! & ACTION!
You are welcome to take a look at our free SpotOn event series. Today's focus is set on "Water Injection Molding".
Do you have warpage problems with plastic components and already experience with the water injection process? Learn how to reduce complex experiments as well as material and manufacturing costs and how to optimize design processes.
The water injection technology (WIT) is a fluid-assisted injection molding process. Using this technology, the molding cavity is completely or partially filled first and then second, injected with water (WIT) as a fluid.
We are very much looking forward to our guest speakers >> Mr. Ulrich Stieler, Firma Stieler Kunststoff Service GmbH, who will provide an objective look at this special fluid-assisted injection molding technology. We are already eager to see, what he will present.
Additionally, our Mr. Cristoph Hinse, General Manager of SimpaTec, will give a detailed presentation on simulation-based analysis and optimization methods from the mold filling as the first step to the injection of the fluid (2nd phase). Results, such as the wall thickness distribution, allow conclusions to material or weight reductions and to export geometries for further structural-mechanical calculations. With variable process settings such as volume flow, filling level, material and mold temperature as well as fluid-specific settings such as filling pressure, holding and delay time, advantageous effects on the process and the distortion of the component can be precisely analyzed and optimized.
The event will be moderated by Mr. Steffen Paul, Managing Director of SimpaTec. You are invited to ask questions in the chat during the entire event. We are happy to answer the most important chat questions in the discussion at the end of the SpotOn.
Broaden your horizons and find out about current developments in the field of sensor technology in tool making.
10.00 "Welcome to our SpotOn's"
Steffen Paul, SimpaTec
10.05 "The power lies within the water.
Fluid-Assisted Injection Molding and its Simulation: the Combination for Improved Efficiency"
Cristoph Hinse, SimpaTec
10.35 "Water assisted injection molding, applications, History and similar alternatives"
Ulrich Stieler, Stieler Kunststoff Service GmbH
10.55 Discussion of the chat questions
Register now for our - SpotOn "Water Injection Molding"
By the way - also for German speaking interested people there is the possibility to inform about current trends for water injection molding register now for
>>> the free SpotOn "Wasserinjektionstechnik (WIT)" on Thursday, March 18, 2021, 11.00 a.m. (MEZ) in German!
free of charge
Do you prefer the direct contact? We are happy to answer your questions on the phone.+49 241 56 52 76-0
If you have any questions regarding your registration, please contact our event firstname.lastname@example.org