Kostenfreies Webinar - Pulverspritzgießen
WebinarsIn powder injection molding, finely powdered metal or ceramic is mixed with a measured amount of binder to form a raw material. The raw material can be molded as a component by injection molding, debinding and sintering. The surface structures are as smooth as if they have been polished. Complex components can therefore be produced in large quantities in a single operation for a wide variety of industries.
Challenges:
_ Final quality of the surface structure
_ Efficiently reducing the effects of volume shrinkage, warpage and black lines (uneven powder concentration) in order to achieve a high quality standard for sintered products
_ 'Black Line Phenomenon' that occurs in connection with the separation of binder and the resulting areas with low powder concentration
What is Moldex3D capable of?
_ Visualization of the flow behavior of the feed material consisting of powder and binder
_ Predict possible formal errors, such as warpge or black lines
_ Evaluation of the effect of the shear rate on the powder concentration
_ Evaluation of the optimal mixing proportion of powder and binder
_ Calculation of the properties of the raw material
_ Optimize process conditions, e.g. temperature or filling speed
Register now!
Registration deadline: 03-03-2020 at 15:00 hours
kostenfrei
Registration
Contact
Do you prefer the direct contact? We are happy to answer your questions on the phone.
+49 241 56 52 76-0If you have any questions regarding your registration, please contact our event department.
events@simpatec.com