Webinaire gratuit - Comment interpréter les résultats d'une simulation de moulage par injection
WebinarsThis webinar will help you discover how to interpret the results of a simulation. We will talk about the 4 phases of a cycle time, namely filling, packing, cooling and warpage.
For each phase of the cycle, you will discover the most useful tools to make a good analysis but also how to interpret the results. You will discover different phenomena present during filling and packing such as the hesitation phenomenon, welding lines, air traps...
The problems of shrinkage, hot spots, volume shrinkage but also cycle time and all the elements important during cooling.
The warpage part will also be seen with the tools for concentricity and flatness but also the classical analysis of the warpage.
A webinar which is not a training but which will give you all the tracks for a good understanding of the results of a simulation.
Webinar highlights:
_ Simulation analysis
_ Filling
_ Packing
_ Cooling
_Warpage
_Moldex3D
Inform yourself and sign up now!
Registration deadline: 04-08-2020 at 15:00 hrs
Registration
Contact
Do you prefer the direct contact? We are happy to answer your questions on the phone.
+49 241 56 52 76-0If you have any questions regarding your registration, please contact our event department.
events@simpatec.com