25 Sep 2018 until 26. Sep 2018 09:00 - 16:00
in Paris, Les Salons de l'Aveyron

Moldex3D Technology Conference 2018


Moldex3D Technology Conference (MTC) is the world’s leading expert conference for plastic manufacturing and engineering. Every year we bring together industry leaders, technical specialists as well as hundreds of Moldex3D users from around the world to discuss the latest development and trends for plastic injection simulation.

As the top communication platform, MTC focuses on the real issues that drive the day to day lives of plastic technology professionals, providing the attendees access to valuable insider knowledge and establish useful contacts in the plastics industry. We are looking forward to seeing you at this industry signature event on 25-26 Sep at Les Salons de l’Aveyron in Paris, France.

Top 5 Reasons You Should Attend MTC 2018
No 1 _ Learn from top professionals on current hot topics.
No 2 _ Hear case studies and best practices from your industry peers.
No 3 _ Learn how to leverage CAE technology to unleash the full potential of your product design.
No 4 _ Discuss the latest development and uncover exclusive insights into most advanced simulation technologies.
No 5 _ Meet over 250 fellow specialists in the plastic industry from around the world.

Seats are limited. You don’t want to miss out on this annual must-attend event for plastic manufacturing and engineering. Registration is now officially open at Early Bird rate. Register today to secure your spot and save!

Download the event brochure

DAY 1: Tuesday, 25 Sep, 2018
08:30 – 09:00    Registration
09:00 – 09:10    Opening
09:10 – 09:50    Integrative Simulation of Thermally Conductive Plastics via Ultrasim®
                             BASF, Andreas Wonisch
09:50 – 10:30    Thermoset Process Simulation at BOSCH
                             BOSCH, Balázs Solymossy
10:30 – 10:40    Award Ceremony
10:40 – 11:00    Coffee Break / MTC Exhibition
11:00 – 11:40    Moving Pin Simulation and Tool Deflection
                             INglass, Nicola Pavan
11:40 – 12:20    Application of the Warpage Analysis to Optimize Shrinkage and Deformation
                           in a Large Component in PA66 GF30
                             RADICI, Carlo Grassini
12:20 – 13:30    Lunch / MTC Exhibition
13:30 – 14:10    Case Studies and Best Practices for Plastic Injection Molding from Pre- to Post-
                           Processing Using ANSA & META - Unleashing the full Potential of ANSA Meshing
                           Capabilities for RTM Analysis
                              BETA Systems, Panagiotis Fotopoulos
14:10 – 14:50     Challenges of Simulation of Thermosetting Molding Compounds
                              Schwarz Plastic Solutions, Ingo Schwarz
14:50 – 15:30     Process Numerical Simulation to Serve Antivibratory Composite Part (DYNAFIB)
                              IPC, Patrick DEWAILLY
15:30 – 16:00     Coffee Break / MTC Exhibition
16:00 – 16:40     Bridging the Gap Between Product Development and Manufacturing through
                            Training and Instrumentation
                              RJG, Kenny Lu
16:40 – 17:20    TBD
                             ARCONIC, Luca Gaffuri
17:20 – 18:00    Power Lies in the Water Fluid-Assisted Injection Molding and Its Simulation:
                           the Combination for Improved Efficiency
                             SimpaTec, Cristoph Hinse
18:00 – 19:30    Aperitif / MTC Exhibition

DAY 2: Wednesday, 26 Sep, 2018
09:00 – 09:10    Opening
09:10 – 09:50    Simulation of Demolding Issues, Full automatic Flow Simulation and
                           Online Measurement of Viscosity Data
                             LEGO, Brian Keith Sørensen, Patrick Guerrier
09:50 – 10:30    How to Integrate Design of Experiments Moldex3D Module on
                           Injection Process Set Up
                             Grupo Antolin, CARMEN de ulibarri Martinez
10:30 – 10:40    Award Ceremony
10:40 – 11:00    Coffee Break / MTC Exhibition
11:00 – 11:40    An Optimization Approach to Reduction of Warpage in Automotive Interior Parts
                            Dr. Schneider, Przemyslaw Narowski
11:40 – 12:20    Challenges of Predicting Interfacial Adhesion in Overmolding Process
                             Brightlands Materials Center
12:20 – 13:00    Design and Analysis of Composite Oil Pan for Automotive Vehicle
                             Bay Zoltán, Róbert Beleznai
13:00 – 13:40    Moldex3D R16 and Beyond
                             Moldex3D, David Hsu
13:40 – 15:00    Farewell & Lunch

Les Salons de l’Aveyron
17 Rue de l’Aubrac, 75012 Paris – France

Recommended Accommodations
Hotel Claret Bercy __ walking time: 11 min (850m)
Hotel Novotel Paris Centre Bercy __ walking time: 8 min (650m)
Hotel ibis Styles Paris Bercy __ walking time: 8 min (600m)
Kyriad Paris Bercy Village __ walking time: 1 min (93m)
Hotel ibis Paris Bercy Village 12ème __ walking time: 4 min (350m)
Aparthôtel Adagio Paris Bercy __ walking time: 6 min (450m)
Le Pullman Paris Centre – Bercy __ walking time: 7 min (550m)

MTC Exhibition
In the adjoining exhibitor area renowned companies such as Arconic, BETA CAE Systems, eXstream Engineering, Ingenium Tooling, Incoe, INglass SPA, IPC - Innovation Plasturgie Composites, Meusburger Georg GmbH & Co. KG, RJG and Simonis Group present their latest and up-to-date products and trends at a top class level.
Become a sponsor ...

Be part of the MTC 2018 in Paris and register now!

Registration deadline
One week prior to the event

Attendance fee
300,00 EUR plus tax
Only a few places left


  • The participation fee entitles to take part in the individual event and includes the complete presentation material and all food and beverages for the respective period of time for one person. The accounting takes place directly after having registered. Cancellations up to 30 days before the event are free of charge. In case of a cancellation 2 weeks prior to the event we charge 70%; after that 100% of the participation fee.


Do you prefer the direct contact? We are happy to answer your questions on the phone.

+49 241 56 52 76-0

If you have any questions regarding your registration, please contact our event department.